Enviromental Impact
Monkey Grip contains no solvents and no toxic or harmful elements that can affect the environment.


Applications
Monkey Grip can be wind rowed over a wet coating or added to the coating product before application to improve the safety factor of any coated area where wet slipperiness can be a safety factor.


Benefits

The clear transparent beads do not affect the color or transparency of a clear coat or a color seal coating.

Inert: Monkey Grip is completely nonreactive.It will not affect the cure or drying time of acrylic or urethane coatings.

Non-toxic: Monkey Grip is harmless to the environment and to the operator. If spilled, it can be hosed off with no harmful effects. Dilute BondIt 1:1 with water and use in place of water to make up the concrete or overlay.


How To Use
Monkey Grip can be spread over the surface of the wet coating layer taking care to spread it evenly over the surface. When the layer is dry it should be over coated with a clear layer of sealer to lock in additive and insure long wearing characteristics.

Alternately, the Monkey Grip may be premixed with the sealer and stirred in thoroughly to a uniform consistency. Add on bag of Monkey Grip to 5 gallons of sealer. This mixture may be sprayed, rolled or brushed over the surface. Always stir the mixture occasionally during application.

When treated layer is dry, over coat it with a clear sealer coat. This locks in the additive and gives long wearing characteristics.


Properties
Type: Colorless, Inert slip resistance agent
Colors: colorless
Odor: None
Toxicity: Non-toxic
VOC’s: None
Flammability: Non-Flammable